How to replace automobile wheel hub bearings?

Wheel hub bearings are key components that carry the weight of the vehicle during driving, and need to be checked and replaced regularly to ensure the normal operation of the vehicle. JITO wheel hub bearings are briefly analyzed. The following are detailed steps for replacing car wheel hub bearings:

1. Remove the tire

First, you need to remove the tire so that you can see the car brake disc and brake caliper. After removing them, you can see the front wheel bearing. Use an open-end screwdriver to remove the fastening nut of the bearing, and then remove the nut with a 30mm socket.

2. Remove the brake caliper

Use an 18mm plum wrench to remove the two screws that fix the brake caliper, and slowly remove the brake caliper to prevent the brake oil pipe from breaking. Next, remove the brake disc. Remove the brake disc from the outside. If the brake disc cannot be removed, you can use two screws to tighten it on the brake disc hole, and then tighten the screws with a wrench of the corresponding size, so that the brake disc can be removed.

3. Remove the front wheel bearing

The solid nut on the outside of the bearing has been removed, and the bearing can be removed by pulling it out with both hands. Install the new bearing, replace the new solid nut, and after tightening the nut, use an open screwdriver to rivet the edge of the nut so that the nut will be more secure. Finally, install the dust cover.

4. Install the brake disc and brake caliper

After installing the new bearing, install the brake disc and brake caliper. In this way, the replacement of the wheel hub bearing is completed.

JITO wheel hub bearing reminds that it should be noted that wheel hub bearing replacement requires certain professional knowledge and skills. If you are not sure of your ability, it is best to find a professional to replace it. In addition, it is also important to regularly check the wear of the wheel hub bearing to ensure the safety and reliability of the vehicle.